XPOtool Tile Levelling System 4000 Pull Tabs 1.5mm

Pull tabs are the best solution for laying tiles evenly and avoiding unevenness.First, the pull tabs are placed in the joint or seam. Once the adjacent tile placed, corresponding wedges are pushed through the tabs with a special pair of pliers (not included) until the two tiles are level.After the tile adhesive has hardened, the pull tabs are broken off at the predetermined breaking point. The lower part remains between the tiles and is grouted along with them; after gouging, the remains of the tabs are no longer visible.The width of the joint depends on the material thickness of the tab. To give you an example: A tab with a thickness of 1.0 mm creates a joint or seam that is also 1.0 mm wide. In order to be able to tile quite a large area, the XPOtool tile levelling system set contains sufficient pull tabs. The tile levelling system pull tabs are suitable for slabs with a thickness from 3 to 12 mm.