XPOtool Tile Levelling System 100 Spacer Clips for 2.5mm Floor Joints

These tile levelling system spacer clips are the optimal tools for laying tiles evenly. In combination with the corresponding wedges (not included), the clips achieve a perfectly levelled result. Simply place the spacers in the joint and lay the neighbouring tile. Then, the wedge is pushed through the clip using special fastening pliers (not included). The wedge is pressed through the clip until the two tiles have reached the same height.After the tile adhesive has hardened, the wedges, which are reusable, can be pulled out. The spacers, on the other hand, have predetermined breaking points for breaking off the visible part of the clip after the adhesive has cured. The lower part remains between the flagstones and is grouted along with them. After gouging, the remains of the tile levelling system are no longer visible.The width of the joint depends on the material thickness of the clip. Our spacers have a thickness of 2.5 mm and thus create a joint width of 2.5 mm as well. To tile a large area, one bag includes 100 spacers. The tile levelling system spacer clips are suitable for slabs with a thickness from 3 to 12 mm.