XPOtool Swimming Pool Filter Pump 1100W 27000l/h Variable Rotat. Speed

This XPOtool pool pump can significantly increase the water quality of swimming pools and whirlpools. For it has a maximum circulation capacity of 450 litres per minute, which results in powerful 27,000 liters per hour, so that the water is permanently cleaned. For this purpose, the pool pump is installed in front of the filter tank so that the water is sucked into the filter system, cleaned, and led back into the pool. This counteracts the spread of algae and accumulation of germs. The maximum pump height of the pool pump is 18 metres and that with low-noise operation.The special feature of the 1100-watt pool pump is its variable speed, which can be set in three stages between 600 and 3000 revolutions per minute. Thanks to the multiple-speed options, the pump can be operated at a low and energy-efficient speed, saving electricity. On the other hand, the pump can also run at full speed when more power is required. In addition, not all devices connected require a high speed and individual adjustment is therefore possible. Whether low or high speed is required, the motor of the pump has practical overheat protection.Note for the right pump performance:The pool and pump match if the content of the pool is circulated twice a day. The recommended guideline is an operating time of approx. 8 hours. If a pool contains 40 m³ of water, this results in a daily circulation of 80 m³. The total circulation divided over the 8 hours is 10 m³ per hour. This means that a pool with a volume of 40 m³ requires a filter system that delivers at least 10 m³/h (167 ℓ/min) of water.