XPOtool Eraser Rubber Pad Ø88mm w/ Adapter for Removing Glue Residues

Do you wish to grant your car a new look or exchange its advertising inscription? To do so, the old film needs to be removed. It is precisely when this already has lost colour and got cracks due to the weather and UV radiation that removing it can become a mere ordeal. It can often be seen that small pieces of the film and glue residues remain on the varnish that must be removed with sharp badge scrapers or aggressive detergents. Now you can use our eraser rubber pad to remove car films in a varnish-friendly manner and without any residues remaining.The rubber eraser disc is equipped with a thread (M8x1.25). This can be used to fix an adapter with a 6-mm shaft (included in the scope of delivery). Thus, the badge remover is suitable for most usual drilling machines and cordless screwdrivers.Before beginning to remove the car film, you should test the glue residue remover at a non-visible spot to make sure that the surface of your vehicle is not damaged when you apply the pad. However, the badge eraser is suitable for most metal, varnish, and glass surfaces.First, you should clean coarse dirt from the spot to be erased. After that, the eraser disc is moved from one side over the self-adhesive film while you exert a slight pressure on it until all residues have been removed. For best results, a speed comprised between 1,500 and 3,000 rpm is advisable; yet, the speed should never exceed 4,000 rpm. The stop line shows you the moment when you must replace the sticker remover.The film eraser is the ideal tool for removing stickers, badges, self-adhesive weights, and films from cars, motorcycles, camping vans, trailers, boats, lorries, etc. without any residues remaining and without damaging the surface of your vehicle.