XPOtool 7-pcs Set 370mm Spring Compressor w/Claw and Ball Joint Puller

This XPOtool set of ball joint puller, spring compressor, and claw extractor combines tools with which you can realise numerous extracting and pulling jobs.3- and 2-jaw pullers are ideally suitable for quickly and safely removing, e.g., gears, pulleys, or ball bearings off a shaft. Their clamping depth can be set as desired. The claw pullers are forged, chrome-plated, and can be used for both interior and exterior setting. The set contains:• puller, 2-jaw, 75 mm• puller, 3-jaw, 100 mm• puller, 3-jaw, 150 mmThe 2 pieces of ball bearing puller and track rod end extractor support not only professionals but also amateur mechanics and are universally suitable for nearly all types of vehicles for the release of ball studs and track rod ends.Properties:• Universal ball joint puller plus tie rod extractor• To express the ball studs when the ball joints are dismantled• Both tools are manufactured of forged tool steel• For any kinds of vehicles in the field of car sector• Opening 20 mm, width 35 mm• Adjustable range 20–50 mm• 2 spindles M14x1.5, drive with hexagonal width across flats 19 mm• Forged and galvanised• Opening 16 mm, width 30 mm, height 47 mm• Spindle M12x1.75, drive with hexagonal width across flats 19 mmA spring compressor is used for (un)mounting chassis springs to or from the front or rear axle or for lowering down a vehicle.The two pieces of spring compressors consist of a threaded spindle made of C45 carbon steel and two forged clamping heads. The tighteners or stretchers can be screwed with a ratchet, wrench, spanner, or impact wrench (not included). The 4 claws of the clamping jaws provide for an optimum hold and prevent the spring from slipping or gliding off.The spindles of the spring compressors are 340 mm (approx. 13²⁄₅″) long each, and, together with the square drive of ½″ found on both sides, 370 mm (14.6″) long each.