XPOtool 3/1 Macerator Waste Pump 250W 3 Inlets Shower Washbasin

This XPOtool 3/1 waste pump is equipped with a 250 W motor that has an aluminium coil and a diameter of 95 mm. This motor makes sure that the dirty water of the sanitary installations connected is pumped down and drained into the main pipe. To be able to do so, the device has three inlets with a 40-mm diameter each for connection to the drain, and a 23/28-mm outlet; thus, you will be able to connect the system to more than one sanitary installation. To give you an example, the inlets can be connected to a washbasin, a bathtub, and a shower.The waste pump has a maximum pump capacity of 100 l/min, a maximum pumping head of 7 m, and a maximum draw of 70 m. It is necessary to take the relation between the pumping head and draw into consideration: despite of the pumping head having a max. of 7 m and the draw one of 70 m, the total flow capacity of the station is composed of the relation of the two values. 1 m of pumping head (vertical flow) thereby equals 10 m of draw (horizontal flow), assuming that the incline towards the point of discharge into the sewer equals 1 %.Pumping head — draw:7 m — 0 m6 m — 10 m4 m — 30 m2 m — 50 m0 m — 70 mDevices installed in the cellar have to overcome a pumping head of 4 m in most cases, which would give the pump at least a draw of 30 m. This value is by far sufficient in most cases.Thanks to its compactness, the station can also be installed in a very narrow space; thus, you can even connect it to a shower or washbasin installed in the attic. The system tolerates water temperatures of up to 65 °C. With a volume of 30–40 dB, the XPOtool 3/1 waste water station is pleasantly quiet and quite unobtrusive.