Toboli 2in1 Screen Laptop Monitor Holder Bracket VESA 75x75/100x100

This Toboli 2-in-1 holder carries a monitor and a laptop at the same time and side by side and allows the user to individually adjust their orientation to match his or her needs. The black mounting frame is suitable for monitors with a 17–32-inch screen and has a maximum capacity of 9 kg. The part holding the laptop is designed for 10–15.6-inch notebooks that have a maximum weight of 4 kg.For comfortable working, the holder and screen mounted thereto can be inclined within a range going from +45 degrees to −45 degrees. Furthermore, the swivelling range can be adjusted to an angle going from +90 to −90 degrees, and the rotation of the screen from +180 to −180 degrees. Thus, you can adapt the visual angle and best working height without any problem. For the monitor to be attached to the holder in a safe way, the bracket has two VESA standards: 100 x 100 mm and 75 x 75 mm. The cables can be guided alongside the monitor holder with the help of a cable clamp for them not to disturb.With a few movements, the holder can be fixed to the edge of your desk with the help of the fixation clamp. When doing so, you can choose between two ways of fixation, the holder thus being suitable for both tabletops of 10–45 mm and 45–85 mm. The advantage of this fixation method is the holder only demanding little space on the desk and your disposing of a large work surface. Moreover, the screen holder can be attached to the tabletop with the help of a fastening clip. For this purpose, the tabletop should have a hole with a diameter going from 10 to 60 mm. If there is no such hole, the user can produce one with an appropriate drill (not included).