SunSun Bio Pond Filter 60000I CBF-550 large box Filtration

Highlights: • Dirt Indicator • Large amount of water flow • Dirt drain at filter bottom for coarse dirt • Temperate display for measuring the actual water temperature • Different filter materials (special filter sponge, Japan matting) • Filter materials are simply pressed out by means of a shoving-system Our SunSun bio pond filter is suitable for garden ponds up to 60,000 litres. With a pond filter capacity of approx. 120 litres, distributed throughout 1 chamber, it ensures a reliable of the water with minimum effort. The Filter is equipped with 4 coarse filter, 4 fine filters and 2 Japan-filter mats. The pond filter is positioned at the banks of the pond and connected with a suitable pond pump (not included in the delivery, check the max. flow rate) in the water. Measurements: Measurements – distance to inlet, measured from bottom to the hole centre – 31 cm Measurements – distance to outlet, measured from bottom to the hole centre – 26 cm Fundamental Functionality: Pond filter combine the mechanical and biological cleaning. Microorganisms settle on the filter material and remove germs and bacteria from the water. By mechanical filtering, suspended particles and dirt remain in the pond filter and by this means no longer return to the pond water. It takes about 4–6 weeks, until Filter Bacteria have sufficiently colonized the bio pond filter. Only thereafter t is advisable to switch on a UVC Pond Clarifier. Starter bacteria help to shorten the start-up phase of a new filter. Starter bacteria refer to microorganisms especially grown in a laboratory. By adding them, you can shorten the start-up phase considerably. Bacteria are active above a temperature of approximately 10–12 °C, the pond filter´s temperature should exceed 40 °C. So, the pond filter should be placed in the shadow and not be exposed to direct sunlight. UVC-pond clarifiers irradiate the water in a flow-through reactor with UV rays. The UV-C radiation destroys the swimmig algae. The algae agglutinate to large particles and ca be easily removed by means of mechanical filtering. Our UVC clarifiers modify the tertiary and the quaternary structure of the algae proteins by means of UV-radiation. This means the destructions of the algae which can be removed from the water by pond filters. This SunSun UVC-Clarifiers can be connect this CUV-Filter directly to the bio-pond filter: SunSun CUV-224 Pond Clarifiers with 24-W UVC lamp SunSun CUV-236 Pond Clarifiers with 36-W UVC lamp SunSun CUV-324 Pond Clarifiers with 24-W UVC lamp SunSun CUV-336 Pond Clarifiers with 36-W UVC lamp SunSun CUV-624 Pond Clarifiers with 24-W UVC lamp SunSun CUV-636 Pond Clarifiers with 36-W UVC lamp The UVC-Pond Clarifier is connected to the pond filter through the drillings on the back. Larger UVC-Pond Clarifier-units must be connected by a pond hose: SunSun CUV-136 Pond Clarifiers with 36-W UVC lamp SunSun CUV-155 Pond Clarifiers with 55-W UVC lamp SunSun CUV-172 Pond Clarifiers with 72-W UVC lamp SunSun CUV-272 Pond Clarifiers with 72-W UVC lamp SunSun CUV-655 Pond Clarifiers with 55-W UVC lamp SunSun CUV-672 Pond Clarifiers with 72-W UVC lamp SunSun CUV-6110 Pond Clarifiers with 110-W UVC lamp The same applies for the connection of the smaller UVC-Pond Clarifier-units to the pond filter. The connection to the pond pump is done by a pond hose. Then, the Pond Clarifier can be placed or screwed in distance to the pond filter: SunSun CUV-318 Pond Clarifiers with 18-W UVC lamp SunSun CUV-111 Pond Clarifiers with 11-W UVC lamp SunSun CUV-209 Pond Clarifiers with 9-W UVC lamp SunSun CUV-218 Pond Clarifiers with 18-W UVC lamp SunSun CUV-618 Pond Clarifiers with 18-W UVC lamp Mounting Instructions: According to the VDE Directive, the pond filter that is connected to a UV clarifier has to be installed at 2m safety distance from the water.